Home CISCO Switches Checking which ports are connected / not connected, which VLAN, speed in CISCO Catalyst 6509E
Checking which ports are connected / not connected, which VLAN, speed in CISCO Catalyst 6509E PDF Print E-mail
Written by Siva   
Sunday, 06 March 2011 13:49

Use Show interface status command. Here I have all 10G speed.

 

 

VMG-6509E-SWITCH>

VMG-6509E-SWITCH>sh int status

 

Port         Name               Status       Vlan       Duplex  Speed Type

Te4/1        myset1-dc-gw1 upli connected    trunk        full    10G 10Gbase-SR

Te4/2        myset1-dc-gw2 upli connected    trunk        full    10G 10Gbase-SR

Te4/3        heartbeat to mydc1 connected    trunk        full    10G 10Gbase-LR

Te4/4                           notconnect   routed       full    10G No Connector

Te4/5        myset1-dc-gw1 upli connected    trunk        full    10G 10Gbase-SR

Te4/6                           connected    routed       full    10G 10Gbase-SR

Te4/7        heart to mydcse1-d connected    trunk        full    10G 10Gbase-LR

Te4/8                           notconnect   routed       full    10G No Connector

Te4/9                           disabled     routed       full    10G No Connector

Te4/10                          disabled     routed       full    10G No Connector

Te4/11                          disabled     routed       full    10G No Connector

Te4/12                          disabled     routed       full    10G No Connector

Te4/13                          disabled     routed       full    10G No Connector

Te4/14                          disabled     routed       full    10G No Connector

Te4/15                          disabled     routed       full    10G No Connector

Te4/16                          disabled     routed       full    10G No Connector

Gi5/1                           disabled     routed       auto   auto No Transceiver

Gi5/2                           disabled     routed       auto   auto No Transceiver

Gi5/3                           disabled     routed       auto   auto 10/100/1000BaseT

Te5/4                           disabled     routed       full    10G No Connector

Te5/5                           disabled     routed       full    10G No Connector

Po1          L2 etherchannel gr connected    trunk      a-full    10G

Po2          L2 etherchannel gr connected    trunk      a-full    10G

Po3          L2 cross trunk eth connected    trunk      a-full    10G

VMG-6509E-SWITCH>sh ver

Last Updated on Sunday, 06 March 2011 14:03
 
 

Advertisement

Featured Links:
HREmail.com
Looking for job? Try HREmail.com
Want to have CMS based Websites?
Try siliconwebcreators.com to CMS based websites.
VM Solutions Inc
For best VM solutions..
Digital Procedure Inc.
Looking for Oracle /SAP /Weblogic Consulting services? visit digitalprocedure.com